Konica Minolta bizhub 360, User Manual

Page: 219 / 692

Application Functions 5
bizhub 360 5-3
Applicat
io
n Fun
c
ti
on
s
Ch
apt
er
5
To copy using OHP Interleave
0
Load OHP transparencies in the bypass tray, one sheet at a time.
0
Never load OHP transparencies in any tray other than bypass tray, other-
wise machine trouble may be caused.
0
Specify the paper type as OHP in paper setting for bypass tray.
0
Load copy paper in any tray other than bypass tray to match the size of
OHP transparencies. Paper of different sizes cannot be used as interleaf.
0
With OHP Interleave specified, Auto Zoom and Sort are automatically se-
lected.
0
Print quantity will be fixed to 1 and cannot be changed.
0
If the machine is equipped with the Finisher FS-511 option, printed trans-
parencies will be output to tray 1 only. Only Sort and Sort + Offset modes
are available.
With the Finisher FS-510 option equipped, the machine can deliver trans-
parencies to any output tray. Only Sort and Sort + Offset modes are avail-
able.
Even if the machine is equipped with the Saddle Stitcher SD-502 option,
neither the saddle stitcher tray, Fold & Staple, nor Half Fold mode can be
used.
1
Position the original.
2
Load OHP transparencies in the bypass tray.
– Load one sheet at a
time.
The Paper Screen will be displayed on the touch panel.