Konica Minolta bizhub 360, User Manual

Page: 134 / 692

3 Basic Copy Operations
3-16 bizhub 360
Basic Co
py O
p
e
rat
io
ns
Ch
ap
te
r 3
3.5 Paper Size Setting
The following two modes are provided to select the paper size.
Select either mode to cope with the desired copying operation.
-
Automatically select the paper size according to the original size.
-
Manually select the desired paper size.
To select paper size automatically (Auto Paper Select)
This mode detects the original size placed in the ADF or on the original glass
and makes a copy of an appropriate paper size selected automatically.
If Zoom is set to ×1.000, the machine selects the same paper size as the orig-
inal.
If other magnification ratio is selected, the machine automatically specifies
an appropriate paper size according to the magnification ratio selected.
0
The machine is initially set to operate ×1.000 Zoom and Auto Paper Se-
lect as factory default.
0
Auto Paper Select and Auto Zoom are incompatible.
0
The paper size loaded in bypass tray can also be detected and selected
automatically by Auto Paper Select.
0
The trays specified as “Special Paper” cannot be selected by Auto Paper
Select. Use this setting for loading special paper in a tray.
See page 14-10 for details of “Paper Type”, and see page 3-20 for details
of “Paper Setting for Bypass Tray”.
1
Touch [Paper] on the Basic Screen.
The Paper Screen will be displayed.