Konica Minolta bizhub 308e, Quick Manual

Page: 116 / 214

3-22 bizhub 658e/558e/458e/368e/308e
Scan-to-Send function 3 3.2
Configuring this machine
The following settings are required.
- Select [NTLM v1/v2] in [Utility] - [Administrator Settings] - [Network Settings] - [SMB Settings] - [Client
Settings], then tap [OK].
-
Select [Utility] - [Administrator Settings] - [System Settings] - [Date/Time Settings] to specify the same
date/time and time zone between this machine and your computer, then tap [OK].
Checklist
While making notes in the checklist shown below, check computer information and configure settings for
preparation. The completed checklist is used for Store Address.
Name Entry column Detail
Host Address IP address to which the scanned data is sent page 3-23
File Path Name of the dedicated folder to receive the scanned data page 3-23
User ID User name required to log in to the computer page 3-23
Password Password required to log in to the computer
•
You should not enter this column for security reasons.
Contact your sys-
tem administrator.