Konica Minolta bizhub 266, User Manual

Page: 133 / 186

bizhub 306/266 7-25
7.5 Fax RX setting 7
7.5.4 Specifying the number of rings
1
Press the Utility key.
2
Use the
+
/
,
key to select [FAX RX OPERATION], then press the OK key.
3
Use the
+
/
,
key to select [NO. of RINGS], then press the OK key.
4
Enter the number of rings using the Keypad , then press the OK key.
%
For the number of rings, specify a numeric value between 1 and 16.
This returns to the fax RX settings screen.
7.5.5 Configuring the print reduction
1
Press the Utility key.
2
Use the + / , key to select [FAX RX OPERATION], then press the OK key.
3
Use the + / , key to select [REDUCTION RX], then press the OK key.
4
Use the + / , key to select [OFF], [ON], or [CUT], then press the OK key.
This returns to the fax RX settings screen.
7.5.6 Configuring the RX printing
1
Press the Utility key.
2
Use the + / , key to select [FAX RX OPERATION], then press the OK key.
3
Use the + / , key to select [RX PRINT], then press the OK key.
4
Use the + / , key to select [MEMORY RX] or [PRINT RX], then press the OK key.
This returns to the fax RX settings screen.
7.5.7 Configuring the RX mode
1
Press the Utility key.
2
Use the
+
/
,
key to select [FAX RX OPERATION], then press the OK key.
3
Use the
+
/
,
key to select [RX MODE], then press the OK key.
4
Use the
+
/
,
key to select [AUTO RX] or [MANUAL RX], then press the OK key.
This returns to the fax RX settings screen.
NO. of RINGS