Konica Minolta bizhub 266, User Manual

Page: 117 / 186

bizhub 306/266 7-9
7.2 Store Address 7
7.2.4 Registering destinations in the speed dial
Register a destination in the speed dial; you can specify a destination easily and accurately without entering
a fax number using the
Keypad .
Up to 250 stations (001 to 250) can be registered in the speed dial.
1
Press the Utility key.
2
Use the
+
/
,
key to select [DIAL REGISTRATION], then press the OK key.
3
Use the
+
/
,
key to select [SPEED DIAL], then press the OK key.
4
Enter a desired 3-digit speed dial number using the Keypad , then press the OK key.
%
This displays a speed dial number that is not registered as the default.
5
Use the + / , key to select [MANUAL SETTING], then press the OK key.
% If the LDAP settings are not configured, this screen does not appear. Go to Step 6.
6
Enter the destination name using the Keypad , then press the OK key.
%
For details on how to enter a character string, refer to [Quick Guide].
% The destination name can be specified with up to 20 characters.
7
Enter a destination fax number using the Keypad .
%
For details on how to enter a character string, refer to [Quick Guide].
% A fax number can be specified using up to 30 digits.
% An E-mail address can be entered into a destination.
%
When not specifying the F-code transmission, baud rate, or transmission time, go to Step 10.
% When specifying the F-code transmission or baud rate, press the , key, and go to the next step.
-PRESS OK KEY-
SPEED DIAL
SPEED DIAL
SPEED DIAL 011
NAME
OTHER SETTING=
,
SPEED DIAL 011
DESTINATION