Konica Minolta bizhub 266, User Manual

Page: 114 / 186

7-6 bizhub 306/266
Store Address 7 7.2
7.2 Store Address
This function allows you to register or change destinations or settings in the one-touch dial, speed dial, group
dial, or program dial.
7.2.1 Registration items
d
Reference
The items above, excluding number 4, can also be configured using LSU (Local Setup Utility). For details, refer
to page 11-4.
Settings can also be configured using
Web Connection
. Items other than number 4 can be configured. For
details, refer to
Web Connection
- [Address] - [One-Touch Dial Setting], [Address] - [Speed Dial Setting], and
[Address] - [Group Dial Setting] of [User's Guide Network Administrator].
To register destinations in the user mode of
Web Connection
, refer to the following.
Check the one-touch dial (p. 8-13)
Check the speed dial (p. 8-13)
Check the group dial (p. 8-14)
Number Store Address Contents
1 [ONE-TOUCH DIAL] Register a destination in a One-Touch Dial Key ; you can spec-
ify a destination easily and accurately without entering a tele-
phone number using the
Keypad . Up to 32 stations can be
registered in the speed dial. It will be convenient to register the
frequently used destinations.
2 [SPEED DIAL] Register a destination in the speed dial; you can specify a des-
tination easily and accurately without entering a telephone num-
ber using the
Keypad .
Up to 250 stations can be registered in the speed dial.
3 [GROUP DIAL] Up to 50 stations can be registered as one group in a single
One-Touch Dial Key . It will be convenient to register the group
dial when frequently sending the same original to multiple deter-
mined destinations.
4 [PROGRAM DIAL] Register a destination number and sending-receiving function
such as the specified-time transmission or polling reception in a
One-Touch Dial Key ; you can only press the One-Touch Dial
Key to execute the function.