manualshive.com logo in svg

Konica Minolta bizhub 25e, Field Engineering Manual

Share
Download
Konica Minolta bizhub 25e Field Engineering Manual Download Page 284

5-34

5.2.4 PCB section

PCB MAIN

1.  Remove the Plate printer B. (See “PLATE PRINTER B” on page 5-22.)
2.  Remove eight screws [1].
3.  Remove the Cover back [2].

* Remove the insertion on the left side.

>@

>@

>@

>@

>@

>@

>@

>@

>@

4.  Disconnect all the PCB MAIN [3] connectors.
5.  Remove six screws [4].
6.  Remove the spacer [5].
7.  Remove the PCB MAIN [3] while disconnecting two connectors [6] on the right side from the frame.

>@

>@

>@

>@

>@

>@

>@

>@

>@

CAUTION

Do not browse or edit the data in the SD card by connecting it to a computer.  This might the machine 

not to boot correctly, of the data might be all erased when the machine has booted.

Summary of Contents for bizhub 25e


































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands