manualshive.com logo in svg

Konica Minolta Bizhub 222, Service Manual, Page: 411 / 846

Share
Download
Konica Minolta Bizhub 222 Service Manual Download Page 411

6. Utility/Counter Mode

Field Service Ver. 1.0 Dec. 2008

24

FK-503

ADJUSTMENT/

SETTING

6.5.2

Admin. 2

A. Network Settings
(1) Network Setting 2

<SIP-FAX Settings>

6.6

Settings in the Reports

NOTE
• It is shown on [Print List] in [Admin. 1] when security mode is set ON.
• When selecting the Vender 2 for Meter Count Mode, it is shown on [Print List] in 

[Admin.1] and the print list key is not accepted.

• But it is acceptable when the key counter is inserted.

6.6.1

TX Report

6.6.2

RX Report

Functions

• To set whether or not to use SIP-FAX function.
• To enter SIP-FAX addresses.

NOTE
• SIP-FAX Settings screen is displayed only when [YES] is selected for [FAX set] - 

[SIP-FAX Function] in Tech. Rep. Mode.

Use

• To enable SIP-FAX function.

Setting/
Procedure

1.

Touch the [SIP-FAX Settings].

2.

Touch the [YES].

3.

Touch [SIP-Adaptor Address] and enter the address of the SIP adaptor.

4.

Touch the [Enter].

5.

Turn off the main power, wait for 10 seconds or more and turn on the power.

Functions

• To print the latest 50 transmission information.

Use

Setting/
Procedure

1.

Press the Utility/Counter Key.

2.

Touch the [Reports].

3.

Touch the [TX Report].

4.

A TX report will be printed.

Functions

• To print the latest 50 reception information.

Use

Setting/
Procedure

1.

Press the Utility/Counter Key.

2.

Touch the [Reports].

3.

Touch the [RX Report].

4.

A RX report will be printed.

Summary of Contents for Bizhub 222















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments