Konica Minolta bizhub 163, Service Manual

Page: 300 / 588

Field Service Ver. 1.0 Apr. 2007 7. Service Mode
43
FK-506
Adjustment / Setting
O. PROTOCOL REPORT
P. GDI TIMEOUT
7.3.2 FUNCTION
A. UPLOAD F/W
B. FAX RES. COPY TEST
Functions
• Print communication report.
• Choose one from among the following.
Use
Setting/
Procedure • The default setting is “OFF”.
“OFF” ON ON (ERROR)
“OFF”: Disable T.30 communication report.
ON: Print T.30 communication report.
ON (ERROR): Print T.30 communication report when an error occurs.
Functions
• To specify the time for time out when data from PC is interrupted during GDI printing.
Use
Setting/
Procedure • The default setting is “60sec”.
5sec 10sec 20sec 30sec
40sec 50sec “60sec”
Functions
• Download firmware from this machine to remote side, after setup of remote side loca-
tion.
Use
Setting/
Procedure • Machine will dial automatically and copy the Flash ROM date to remote side
machine.
Functions • Fax resolution copy test
Use • To check whether the encoding/ decoding process is correct
Setting/
Procedure [CCD. FAX]
1. Press [AUTO DETECTION] or [MANAUL: XX] to select the paper.
2. Press OK key to scan the next original and Back key to finish the scanning.
[ADF. FAX]
1. Set the original on ADF, and press OK key.