Konica Minolta bizhub 163, Service Manual, Page: 298 / 588

Field Service Ver. 1.0 Apr. 2007 7. Service Mode
41
FK-506
Adjustment / Setting
E. RX LEVEL
F. DTMF LEVEL
G. CNG LEVEL
H. CED LEVEL
I. ECM MODE
J. CODING SCHEME
Functions
• Reception sensitivity level.
Use
Setting/
Procedure • The default setting is “-43 dBm”.
-36 dBm -37 dBm to -42 dBm “-43 dBm” -44 dBm to -48 dBm -49 dBm
Functions
• Dual tone output level.
Use
Setting/
Procedure • The default setting is “-6 dBm”.
-2 dBm -3 dBm to -7 dBm “-6 dBm” -9 dBm to -16 dBm -17 dBm
Functions
• Calling tone output level.
Use
Setting/
Procedure • The default setting is “-10 dBm”.
-2 dBm -3 dBm to -9 dBm “-10 dBm” -11 dBm to -16 dBm -17 dBm
Functions
• Answer tone output level.
Use
Setting/
Procedure • The default setting is “-10 dBm”.
-2 dBm -3 dBm to -9 dBm “-10 dBm” -11 dBm to -16 dBm -17 dBm
Functions
• Select error correction mode.
Use
Setting/
Procedure • The default setting is “ON”.
“ON” OFF
“ON”: When an error occurs during communication, re-send the frame where the error
occurs.
OFF: Any error is ignored during communication.
Functions
• Select compression method in TX/ RX mode.
Use
Setting/
Procedure • The default setting is “JBIG”.
MMR MR MH “JBIG”
MMR: A compression method.
MR: A compression method.
MH: The simplest compression method.
“JBIG”: The most complex compression method that generates the smallest code than
any of following ones.