Konica Minolta bizhub 163, Service Manual

Page: 152 / 588

Field Service Ver. 1.0 Apr. 2007 10. Service Mode
117
bizhub 163/21
1/220
Adjustment / Setting
10.3 Setting in the Service Mode
10.3.1 SERVICE’S CHOICE
A. MARKETING AREA
See the FK-506 Service Manual.
See P.40 of the FK-506 service manual
B. SHIPMENT
C. MAINTENANCE COUNT.
D. IU LIFE STOP MODE
Functions
• To select the display of the fixed zoom ratios and paper sizes according to the appli-
cable marketing area.
Use
Setting/
Procedure • The default setting is METRIC.
“METRIC” INCH JAPAN CHINA L.AMERICA (METRIC) L.AMERICA (INCH)
Functions • To enter an appropriate counter value (0 to 999999) as the tentative maintenance
time.
• Specify the setting on maintenance counter to “1” or “2”: If the maintenance life is
reached, the maintenance call (M1) or service call [Call Service (M1)] will appear.
NOTE
• The counter value is decremented until it reaches -999999 even after it has
counted 0.
Use
Setting/
Procedure • The default setting is 0.
“0” : Not counted
1 : Counted (The maintenance call display is given when the counter reaches 0.)
2 : Counted (The service call display is given and the initiation of any new copy
cycle is inhibited when the counter reaches 0.)
• When “1” or “2” is selected, a screen will then appear to allow the counter value to be
entered.
Functions • When the supplies life count. reaches the life value, the IU life will be detected.
• The mode when the IU life is reached, is specified by this setting.
CONTINUOUS : Enables copying. Maintenance call display is given.
STOP
: Disables copying. service. call display is given and the initiation of
any new copy cycle is inhibited.
NOTE
• The counter value is decremented until it reaches -999999 even after it has
counted 0. In this case, however, no image quality is guaranteed.
Use
Setting/
Procedure • The default setting is CONTINUOUS.
“CONTINUOUS” STOP