Konica Minolta AccurioPress C3070, Quick Manual

Page: 35 / 72

AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L 4-5
4.1 Loading Paper 4
4.1.2 Loading paper into the Paper Feeder Unit PF-602m
The following describes how to load paper into an optional Paper Feeder Unit PF-602m . The same paper
loading procedure is used for Tray 3 and Tray 4 .
d
Reference
For information about how to load paper into other optional paper feeder unit, refer to the [HTML User's
Guide].
1
Pull out the tray to load paper into.
NOTICE
Trays cannot be withdrawn when the machine is powered
off. Turn the
sub power switch on.
To prevent the machine from tipping over, multiple trays
cannot be pulled out at one time.
2
Turn the side guide lock knobs (4 pieces) counterclock-
wise to loosen them.
3
While pressing the side guide lock release lever ( ),
slide the side guide plates to any positions ( ).
%
Determine their locations based on the size indicator of
the bottom plate of the tray.
NOTICE
When moving the side guide plates , be sure to hold the
lock release lever of the front one and the handle of the rear
one. If moved only with the front side guide plate , the side
guide plates may not be fixed in position.
4
While pressing the rear guide lock release lever , slide the
rear guide plate to any positions.
% Determine their locations based on the size indicator of
the bottom plate of the tray.
5
To fix the side guide plates at the correct locations, load an appropriate amount of paper into the tray
while aligning it to the left-hand side of the tray.
NOTICE
Load paper with the print side facing up.
6
Press the side guide plates against paper, then turn the side guide lock knobs
(4 pieces) clockwise to fix them.