Konica Minolta AccurioPress C2060, Quick Manual

Page: 40 / 184

4.1 Installing the Printer Driver (Image Controller IC-603) 4
AccurioPress C2070series 4-4
4.1.3 In a Windows environment
Installation
Start the installer from the Driver CD/DVD supplied with this machine, then install the printer driver on your
computer.
This guide describes an example procedure to install the PS Plug-in driver in a Windows 7 environment.
0
For information about how to install another printer driver, refer to the [HTML User's Guide].
0 A network setting must be configured on this machine before beginning the installation procedure. For
details, refer to the [HTML User's Guide].
0 To carry out this task, the computer's administrator privilege is required.
1
Insert the Driver CD/DVD into the CD or DVD drive of the computer.
% If the installer does not start, open the printer driver folder on the Driver CD/DVD , double-click [Au-
toRun.exe], then proceed to the procedure 2.
2
Select [Printer Install], then select [PS Plugin Driver].
3
Select [EN].
% When the [User Account Control] window is displayed, click [Continue] or [Yes].
4
Click [Next].
5
Enter the printer name or IP address, then click [Next].
The printer is created using the Ipr port.
%
To connect to a different printer (NetBIOS or port9100), select [Other Connection]. For details, refer
to the [HTML User's Guide].
6
Select the name of the printer to be installed, then click [Next].
% If the required printer name cannot be found, click [Have Disk], then directly specify the [Setup.inf]
file.
7
Select the default setting for 2-sided printing, then click [Next].
8
Click [Finish].
% If the [Windows Security] window is displayed, click [Install this driver software anyway].
Then, configure the default setting for the printer driver. For details, refer to page 4-5.