Konica Minolta AccurioLabel 230, Quick Manual, Page: 188 / 194

7-10 AccurioLabel 230
Name of each component 7 7.1
7.1.3 Roll Winder RW-210
External machine items
No. Name Description
1 Main power switch Turns ON/OFF the main power of Roll Winder RW-110
and Roll Winder RW-210 .
2 Nip safety cover Protects the nip rollers in Roll Winder RW-210 . Opened
when setting or replacing the media. If it opens during the
media conveyance or print, the machine stops in emergen-
cy.
3 Safety cover Protects the rollers in Roll Winder RW-210 . Opened when
setting or replacing the media. If it opens during the media
conveyance or print, the machine stops in emergency.
4 Inspection table Used to check the printing status of the media. You can
turn on the light by operating the touch panel.
5 EMERGENCY STOP Press to stop this system in emergency. Use only in case
of emergency.
To release the emergency stop status, turn the knob of
EMERGENCY STOP to the right to return the button to its
original position.
Do not use it to stop normal printing. It may result the ma-
chine and media being damaged.
6 Control panel Operates and sets Roll Winder RW-110 and Roll Winder
RW-210 .
7 Front door (safety door) handle Pulled to the left to open the front door (safety door).
8 Front door (safety door) Protects the rollers in Roll Winder RW-210 . Opened when
setting or replacing the media.
9 Web guide cover Protects the web guide . Remove it to operate the web
guide .
10 Rewinder spindle Winds the media.