Konica Minolta AccurioLabel 230, Quick Manual, Page: 155 / 194

AccurioLabel 230 6-5
6.2 Replacing waste toner box 6
6.2 Replacing waste toner box
When the waste toner box becomes almost full, the following message will appear in the message area of
the screen.
[Waste toner box is full / Please replace the box]
The waste toner box indicator in the [Consumable/Scrap] indicators area of the MACHINE screen lights up
in yellow.
When the waste toner box becomes almost full during printing, the current job can be continued (maximum
300 m / 984.3'). Other job cannot be printed unless the waste toner box is replaced. Jobs can be accepted.
The current job will stop when the waste toner box becomes full.
7
WARNING
NEVER throw the waste toner box into a fire.
-
Otherwise, the toner may ignite and cause a dangerous situation.
-
For details about handling the waste toner box , contact your service representative.
1
Display the help message on the MACHINE screen, and then press [Consumable/Scrap].
2
Press the [Waste Toner] tab in the help message area.
3
Perform the process while using [
,
] or [
+
] to follow the steps.