Konica Minolta AccurioLabel 230, Quick Manual, Page: 123 / 194

AccurioLabel 230 4-55
4.6 Additional printing on the media with eye mark printed 4
4.6.9 Print test pages
Print a test page before printing a job. Adjust the image position and image quality as necessary.
For details, refer to page 3-8.
4.6.10 Adjust the additional printing position
If it is necessary to adjust the image position as a result of confirmation printing, adjust the additional printing
position (vertical/horizontal) on the "Registration Adj." screen.
When printing, heat in the fixing section may cause the media to enlarge or shrink. How much the paper is
affected depends on the type or thickness (weight) of the paper; therefore, after changing the media, always
perform the [Registration Adj.].
1
Press [Registration Adj.] on the MACHINE screen.
The "Registration Adj." screen is displayed.
2
Press [Additional Printing Position].
[Additional Printing Position] is displayed only when [Additional Printing Mode] is turned ON on the MA-
CHINE screen.