Konica Minolta 0902, Service Manual

Page: 57 / 302

Chapter 3 Troubleshooting
3-3
3.1.1 Restore Operation
When the error occurs, confirm if the error recur after restarting the equipment. Hot to restart is described
here.
1
Open the second front door.
2
Eject the cassette if it is possible to eject the
cassette.
See the instruction manual on how to eject the
cassette.
When the push plate unit is not at the read position due
to operational error in the transporter, eject the
cassette by
Step 6 .
3
Close the second front door.
Initialization will be performed.
Initialization will be canceled if there is a fault in the
sensors or if the cassette is not ejected, and an error
will be displayed.
If the error was resolved, it will be in "READY" status.
4
Shutdown the equipment by pressing "operation"
switch for more than 3 seconds.
5
Turn OFF the power supply circuit breaker.
operation erase
"operation" Switch