Konica Minolta 0902, Service Manual

Page: 122 / 302

Chapter 5 Disassembly and Assembly
5-2
5.1 Before Disassembly
5.1.1 Precautions during Disassembly/Assembly
Caution
Be sure to turn off the power supply circuit breaker and unplug the power cable from the
equipment whenever you disassemble/assemble the equipment. Failure to do so may lead to
malfunction, causing your fingers to be wedged between the sliding or rotating parts inside the
equipment.
Caution
Use the anti-static wristband when handling the electronic parts inside the equipment. It is
possible to damage the electronic part by touching it with static buildup.
Caution
Do not touch inside the equipment with your bare hand. Otherwise, the equipment may be
rusted by stain or sebum on your hand, leading to malfunction in the sliding or rotating parts.
Caution
When assembling the equipment, restore the wiring layouts to their original positions and
make sure no wire is wedged between or stuck with the attaching parts. A wire wedged
between or stuck with the attaching parts will cause malfunction in the equipment.
Caution
Never loosen the setscrew painted white. Loosing it may make the equipment unable to be
restored in the service site.