2.3 Removing Protective Parts
2-15
2.3.5 Checking Removal of Protective Parts
Check that the six protective parts have all been removed.
This is the final step in the process of checking the removal of the protective parts.
Next, conduct the work described below.
•
For vertical installation, proceed to
“2.3.6 Installing External Panels”
to install the external panels.
•
For horizontal installation, proceed to
“2.4 Changing Operation Panel Installation Position”
change the installation position of the operation panel.
Caution
Starting the main unit while protective parts still remain inside will cause damage to the main
unit.
Protective part A
Protective part B
Protective part C
Protective part D
Protective part E
Protective part F
Protective Parts
Mounting Screw
Protective part A
Top
Three hexagonal Philips socket screws (M5
×
10)
Right and left
Four hexagonal Philips socket screws (M4
×
8)
Protective part B
Four hexagonal Philips socket screws (M5
×
10)
Protective part C
Four hexagonal Philips socket screws (M5
×
10)
Protective part D
Four hexagonal Philips socket screws (M5
×
10)
Protective part E
Four hexagonal Philips socket screws (M5
×
10)
Protective part F
Three hexagonal Philips socket screws (M5
×
10)
0404YF220A.book 15 ページ 2009年8月20日 木曜日 午後1時26分