Kongskilde Z 665 H, Operator'S Manual

Page: 35 / 100

2 - SAFETY INFORMATION
Safety signs
The following safety signs are on your implement as a
guide for your safety and for the safety of those who work
with you.
Walk around your implement and note the significance
and location of all safety signs before you operate your
implement. Read all the safety signs adhered to the im-
plement and follow the instructions.
Keep all safety signs clean and legible. Clean safety signs
with a soft cloth, water, and a gentle detergent.
NOTICE: Do not use solvent, gasoline, or other harsh
chemicals. Solvents, gasoline, and other harsh chemi-
cals may damage or remove the safety signs.
Replace all safety signs that are damaged, missing,
painted over, or illegible. If a safety sign is on a part that
you or your dealer replaces, make sure that you or your
dealer install the safety sign on the new part. Contact
your dealer for the replacement of the safety signs.
Safety signs that display the “Read operator’s manual”
symbol direct you to the operator’s manual for further in-
formation regarding maintenance, adjustments, or proce-
dures for particular areas of the implement. When a safety
sign displays this symbol, consult the appropriate page of
the operator’s manual.
Safety signs that display the “Read service manual” sym-
bol direct you to the service manual. If you doubt your
ability to perform service operations, contact your dealer.
2-19