Kongskilde Z 455 H, Operator'S Manual

Page: 77 / 92

8 - TROUBLESHOOTING
8 - TROUBLESHOOTING ###_8_###
Fault code resolution
Troubleshooting
Problem Possible Cause Correction
The implement does not
follow the ground. The implement is in transport position. Set the implement in working position. See
Page
6-4 .
The tine breaks too easy. the installation position of the tine is wrong. Turn the tine. See Page 6-2 .
There is too much soil in
the crop. The tine goes too deep in the soil. Raise the lower link arm.
The implement moves
sideways constantly. The stabilizer is too loose. Tighten the spring to the correct distance.
8-1