Kongskilde Z 455 H, Operator'S Manual

Page: 5 / 92

1 - GENERAL INFORMATION
1 - GENERAL INFORMATION ###_1_###
Note to the owner
This manual has been prepared to assist you in the correct procedure to run in, to drive, to operate, to adjust and to
maintain your new implement.
This implement has been designed and built to give maximum performance, economy and ease of operation under
a wide variety of conditions.
Prior to delivery, your implement was carefully inspected both at the factory and by your dealer to make sure that it
reaches you in optimum condition. To maintain this condition and assure trouble
‐ free operation it is important that
routine services, as specified in this manual, are carried out at the recommended intervals.
Read this manual carefully (especially Chapter 2 that covers the safety information) and keep this manual in a con-
venient place for future reference. DO NOT operate or permit anyone to operate or service this implement until you
and/or other persons have read this manual. Read the manual, it will save you time and hassle later. Lack of knowl-
edge can lead to accidents. Employ only trained operators who have demonstrated the ability to operate and service
this implement correctly and safely. Contact your dealer for assistance providing the required training to your opera-
tors. Contact your dealer to obtain additional manuals or alternate language versions.
If at any time you require advice that concerns your implement, do not hesitate to contact your authorized dealer. He
has factory
‐ trained personnel, genuine service parts and the necessary equipment to carry out your service require-
ments.
NOTICE: This implement has been designed and built in line with the requirements put forward by the European
Directives 2006/42/EC and 2014/30/EU.
Always use genuine KONGSKILDE Service Parts or parts that match at least the same quality, reliability and func-
tionality as the equivalent original Service Parts when you service and repair your implement and do not modify your
implement without a written permission of the manufacturer. Failure to do so will void the responsibility of the manu-
facturer.
Check local road legislation before you drive the implement on public roads.
When you operate interchangeable implement, make sure that the implement is CE approved.
As this publication is distributed throughout our international network, the implement illustrated, either as standard or
as an accessory, may vary according to the country in which the implement is to be used. Low specification configu-
rations, as chosen by the customer, may deviate from the specifications given.
Several figures in this operator's manual show the safety guarding or the additional guards, legally required by certain
countries, open or removed to better illustrate a particular feature or adjustment. The implement must not be used in
this condition. For your own safety, make sure that all guards are closed or replaced before you operate the imple-
ment.
1-1