Kongskilde SB 2005, Operator'S Manual, Page: 30 / 104

2 - SAFETY INFORMATION
Implement stability
The combination of your tractor and implement can become unstable, due to the additional weight that the implement
adds to the tractor.
In order to guarantee stable and safe transport, you must check if you need ballast weights for transport and field
work.
You must also check and guarantee that you have at least 20% from the tractor weight on the front axle.
For rear mounted implements and front-rear combinations, the formula is:
ZEIL18HT00277FA
1
Example of references to stability of the combination tractor – implement
List of signs
Te [kg] The tractor own weight.
Tf [kg] Front axle load with empty tractor.
Tr [kg] Rear axle load with empty tractor.
Ir [kg] Total weight of the rear-mounted implement/rear ballast.
If [kg] Total weight of the front-mounted implement/front ballast.
a [m] Distance between the center of gravity of the front-mounted implement/front ballast and the
middle of the front axle.
b [m] The tractor wheel distance.
c [m] Distance between the middle of the rear axle and the middle of the link arm balls.
d [m] Distance between the middle of the link arm balls and the center of gravity of the rear mounted
implement/rear ballast.
2-14