Kongskilde SB 2005, Operator'S Manual, Page: 10 / 104

1 - GENERAL INFORMATION
Intended use
KONGSKILDE disc mower can only perform the usual
work in agriculture. Only connect the disc mower to a trac-
tor that corresponds with the specifications of the imple-
ment and is legal to use. Only the Power Take-Off (PTO)
of the tractor can drive the attached disc mower.
The disc mower can solely cut on the ground natural
or planted grass and stem crops for animal feeding
purposes. The disc mower lays the material in a swath,
which allows the subsequent pick-up of the material.
The work must occur under reasonable conditions, or
thorough agricultural knowledge and authorised opera-
tion, on a normal cultivation that has a reasonable exten-
sion without foreign matter and the like. The performance
of the implement will depend on the crop, the condition of
the field, the ground, and finally the weather.
Intended use implies that you observe the prescriptions
concerning adjustment, operation and maintenance in the
instruction manual. Observed altogether the safety in-
structions as well as common rules concerning technical
safety, working practices and road safety. Also read the
spare parts catalog and use original spare parts. If nec-
essary contact an authorised workshop.
If you notice degradation of performance, contact your
dealer for assistance. He may have useful information
for improvements, or a kit may be available to enhance
the performance.
Prohibited usage
NOTICE: DO NOT use this implement for another pur-
pose than intended by the manufacturer (as described
in the manual, shown by the decals, or in other product
safety information provided with the implement). These
information sources define the intended use of the imple-
ment.
Do not use this implement:
1. To cut grass in park facilities and lawns.
2. To cut grass on the sides of public roadways.
3. To harvest corn.
4. To clear forest or densely wooded areas.
Any other use beyond the intended use is regarded as
misuse and requires the authorization of the manufac-
turer. The manufacturer is not responsible for any dam-
age that results from the improper use of the implement.
The user bears that risk.
Contact your local dealer when you are not sure about
the use or function of your implement in a particular ap-
plication (for example crop, variety, unique conditions,
etcetera) or you do not know if there is a need for spe-
cial equipment or special precautions.
No parts must be fitted to this implement, which have not
been released by KONGSKILDE. They might affect the
implement operation, safety of the user or other people,
stability or wear characteristics of the implement. They
may also void the homologation approval obtained for
your country and compliance with EC directives.
Do not make changes to the implement and its construc-
tion without the permission from the manufacturer. The
manufacturer does not accept any responsibility for dam-
ages that results from unauthorized modification.
1-4