Kongsberg Simrad TV80, Reference Manual

Page: 268 / 356

266
406388/F
its communication channel, which measurements to make and some other relevant
operating parameters.
Details
This dialog box presents a number of parameters that are common to all
Configuration
dialog boxes and some that are specific to the type of sensor connected.
The PX Flow sensor is a wireless multifunction catch monitoring sensor.
In catch monitoring terminology, the flow measurement presents the speed of the water
current entering the trawl opening. The measurement is made with a small acoustic
doppler current profiler (ADCP).
The details provided here are specific to configure this sensor.
Cell 1
Cell 1
refers to the volume of water starting 1 m away from the sensor and ending 2
m away from the sensor.
Cell 2
Cell 2
refers to the volume of water starting where
Cell 1
ends, that is, 2 m away
from the sensor and ending 3 m away from it.
Relevant topics
• Common configuration parameters, page 271
• Non editable information about the sensor, page 274
Related topics
Configuring and setting up the catch monitoring sensors for different measurements,
page 141
Adding more measurements to a PX family sensor, page 144
Overview of sensors channels and frequencies, page 309
Overview of catch monitoring measurements, page 312
PX TrawlEye Configurator dialog box
When you configure a PX TrawlEye sensor, you can select key parameters related to
its echo sounder, check its battery status or even configure some special features like
the learn mode.
Prerequisites
The
PX TrawlEye Configurator
dialog box is only available if there is a PX TrawlEye
connected to your TV80 by means of the configurator cable. Some features of the
PX
TrawlEye Configurator
dialog box will vary according to the SW version of the sensor
itself.
Simrad TV80 Reference Manual