Kongsberg Simrad ST90, Reference Manual

Page: 527 / 690

442704/A
525
TPP (Tracked Target Position)
Simrad TPP is a proprietary datagram format created by Kongsberg Maritime. It
exports the horizontal range, bearing and depth of a tracked target. All data are
related to the tracked target.
Add
Select
Add
to allow export of the chosen data format. Once an output type has been
defined, it is listed in the
Installed Outputs
box on the left side of the page. To start
data recording, open the
Record Processed
button, and select On . Alternatively, simply
select the red circle on the right side of the button.
Remove
Once an output type has been defined, it is listed in the
Installed Outputs
box on the
left side of the page. To remove the output, select the relevant format in the
Installed
Outputs
box, and then select
Remove
.
Edit
Once an output type has been defined, it is listed in the
Installed Outputs
box on the
left side of the page. To edit the settings of a specific output, select it in the
Installed
Outputs
box, and then select
Edit
.
Save
Once you have finished editing the output settings, select
Save
to keep the changes.
Related topics
Exporting sensor data, marker positions and technical information, page 181
Functions and dialog boxes, page 416
Operation menu; Functions and dialog boxes, page 430
Output dialog box, page 438
Relay Output page
The ST90 system allows you to export the same sensor data that was originally imported.
This can "reuse" the same information on other systems. The
Relay Output
page is used to
set up and control this export functionality.
Prerequisites
The
Output
dialog box is not available when your ST90 system is set to Inactive mode.
How to open
This page is located in the
Output
dialog box. The
Output
dialog box is located on the
Operation
menu.
Functions and dialog boxes