Kongsberg Simrad ST90 Reference Manual Download

Page: 448 / 690

446

442704/A

Note that

Gain

TVG

(Time Varied Gain) and

Display Gain

are not filters, but included

only to illustrate the complete "signal path".

Panel Backlight function

The buttons on the Operating Panel have built-in backlight to improve visibility on a dark
bridge. Use

Panel Backlight

to control the intensity of the lights.

How to open

This function is opened from the

Display

menu.

Description

Adjust the background illumination to suit your preferences and the ambient light conditions.

To change the setting, move the cursor to either side of the button. Select the

left

side of

the button to

decrease

the value. Select the

right

side of the button to

increase

the value.

Select the middle of the button to open it.If you have a keyboard connected to the ST90
system, type the requested value.

Note

The

Panel Backlight

function does not work for the Mk3 Operating Panel. Use the dedicated

button on the Operating Panel.

Simrad ST90 Reference Manual

Summary of Contents for Simrad ST90



















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Simrad ST90

Reviews:

Related manuals for Simrad ST90

Brands by name

Popular brands

Kongsberg Simrad ST90, Reference Manual

Search results

Summary of Contents for Simrad ST90

Reviews:

Related manuals for Simrad ST90

Brands by name

Popular brands