Kongsberg Simrad ST90, Reference Manual

Page: 422 / 690

420
442704/A
Save Current Setting
When you have spent some time working with the ST90 system, you are probably
using specific settings that you know are efficient for your purpose. It is a good idea to
save these settings.
Use this function to save the currently applied settings. To save the settings you are
using, select the
Save Current Setting
button. A small dialog opens to accept the name
of the new setting.
You can only add settings to the
Saved Settings
list.
If you do not have a computer keyboard connected to your ST90 system, select the
Keyboard
button to open an on-screen keyboard.
Related functionality
User Settings Setup page
On the
User Settings Setup
page, tick the box to include range, bearing and tilt
information the next time you save the user settings.By default, information about the
current range, bearing and tilt will not be saved. This page is located in the
Installation
dialog box. To open the page, select
Installation
on the
Setup
menu.
Related topics
Saving, retrieving and handling user settings, page 169
Functions and dialog boxes, page 416
Main menu; Functions and dialog boxes, page 417
Range function
The
Range
function allows you to specify the maximum distance from the transducer to
the outer edge of the sonar beam. The range value shown and selected is by default only
applied to the currently selected view.
Specifications: Range
• Minimum: 25 metres
• Maximum: 2000 metres
• Extended range: 000 metres
How to open
This function is opened from the
Main
menu.
Simrad ST90 Reference Manual