Kongsberg Simrad ST90, Reference Manual

Page: 421 / 690

442704/A
419
Note
Unless they are saved, all your current settings are lost when the factory settings are
applied.
Saved Settings
"Saved settings" are those created and saved by you and other users.
Each setting is identified by its name, as well as the time and date it was created.
These settings may be deleted or renamed. You can save an unlimited number of
profile settings, only limited by the size of the hard disk.
Activate Selected Setting
User settings that either you or any of your colleagues have saved can easily be
retrieved and put to use. This shortens down the time it takes to get started with the
ST90 system.
To activate either a factory setting or a saved setting, select the relevant name in one of
the lists, then select
Activate Selected Setting
.
Rename
Use this function to rename one of your saved settings. To rename a user setting,
select its name in the list, and then select
Rename
. A small dialog box opens to accept
the new name.
Note
The factory settings can not be renamed.
If you do not have a computer keyboard connected to your ST90 system, select the
Keyboard
button to open an on-screen keyboard.
Delete
When you save the user settings, the files you have created are shown on the
Saved
Settings
list. The list may be too long. User settings that you do not need can be deleted.
Use this function to delete one of your saved settings. To delete a user setting, select
its name in the list, and then select
Delete
. A small dialog box opens so that you can
verify your choice.
Note
The factory settings can not be deleted.
Functions and dialog boxes