Kongsberg Simrad ST90, Reference Manual

Page: 407 / 690

442704/A
405
Visual Objects menu
The
Visual Objects
menu controls which graphical elements that are shown in the different
views. These graphic elements include markers, vectors and targets that are tracked. The
majority of the functions are "on/off" buttons to enable or disable these graphic elements in
the various views.
How to open
Select
Visual Objects
to open the menu.
Visual Objects
is located on the
Display
menu. The function
is not available for the Inspection views.
Description
The majority of the choices provided by this menu are
self-explanatory. Only brief descriptions are provided.
Note
Before you can change the settings related to a view, you must click inside the view to
activate it. The changes you make are by default only valid for the active view. Several of
the functions offer
Apply to All
. If you select
Apply to All
your setting is applied to all
the views in the current presentation mode.
The choices in the this menu depends on which view in the display presentation that is
currently "active". The menu may therefore change from one view to another. The screen
capture may not show you all the menu choices.
Tip
If you do not need to use the menu system, you can hide it. This allows more space for the
echo presentation.
Use
Menu
on the top bar to hide or show the menu. When the menu system is hidden, it
appears temporarily on the left or right hand side of the screen if you move the cursor to
that position.
Position Object Sizes
The
Place Marker
function allows you to create a marker at the current position of the
cursor. Each marker is shown as a small triangle with or without a short identifying
Menu system