Kongsberg Simrad ST90, Reference Manual

Page: 322 / 690

320
442704/A
Bottom Depth read-out
If enabled, the current water depth under the vessel is shown on the top bar.
Prerequisites
To see this information on the top bar, you must enable it by using the
Top Bar
functions
in the
Display Options
dialog box. Select
General
to open the page. The
Display Options
dialog box is located on the
Display
menu.
Description
To see a valid depth value on the top bar, you must set up your ST90 system to import
depth information from an echo sounder.
Note
The information shown on the top bar must not be used for vessel navigation.
By default, the depth is shown in metres. You can change the unit of measurement on the
Units
page. The
Units
page is located in the
Installation
dialog box.
Related topics
User interface, page 305
Top bar, page 308
Motion read-outs (roll and pitch)
When enabled, the navigational information on the top bar includes the vessel’s current
roll and pitch movements.
Prerequisites
To see this information on the top bar, you must enable it by using the
Top Bar
functions
in the
Display Options
dialog box. Select
General
to open the page. The
Display Options
dialog box is located on the
Display
menu.
Simrad ST90 Reference Manual