Kongsberg Simrad ST90, Reference Manual

Page: 177 / 690

442704/A
175
Tip
When you work in the
Installation
dialog box, you must always select
Apply
to save the
changes made on a page. You must do this before you continue working on a different page.
Procedure
1 Open the
Setup
menu.
2 On the
Setup
menu, select
Installation
.
Observe that the
Installation
dialog box opens. This dialog box contains a number of
pages selected from the menu on the left side.
3 On the left side of the
Installation
dialog box, select
Operating Panel
.
4 Select which operating panel to use.
5 At the bottom of the page, select
Apply
to save your settings.
6 Continue your work in the
Installation
dialog box, or select
OK
to close it.
Related topics
Defining the user-selected features on the Operating Panel, page 174
Operating Panel page, page 587
Assigning user settings or presentation modes to the Operating
Panel
The
User Settings
dialog box is used to store your favourite settings. These settings can be
related to different operations, environmental conditions or basic personal preferences. You
can use different settings to create as many user profiles as you like, and give them any
name. The Operating Panel allows you to assign certain functions to dedicated buttons and
switches. This includes user settings and presentation modes.
Prerequisites
Before you can assign custom user settings to the operating panel, a selection of settings
must be available from the
User Settings
dialog box. The
User Settings
dialog box is located
on the
Main
menu.
Operating procedures