Kongsberg Simrad SN90, Installation Manual

Page: 120 / 298

118
381298/C
Installing the Enix Processor Unit
The Processor Unit is designed to fit into a 19-inch rack. It can also be mounted as a
desktop computer. When mounted on a horizontal foundation, for example inside a
cabinet, rack or console, use the bottom plate with the two base rails. These are fitted
with shock absorbers.
Prerequisites
You must be equipped with a standard set of tools. This tool set must comprise the
normal tools for electromechanical tasks, such as different screwdriver types, pliers,
spanners and wrenches. Each tool must be provided in various sizes. We recommend
that all tools are demagnetized to protect your equipment. Depending on the chosen
installation method, additional tools may be required.
A suitable location for the Processor Unit must be defined prior to installation.
Note
If you place the unit on the bridge, observe the compass safe distance.
A
The bottom plate is mounted with six bolts through
the computer chassis.
B Each rail provides two holes for mounting to a
flat surface.
C
Remove this bolt to release the rail from the
bottom plate.
Context
If you intend to mount the Enix Processor Unit in a 19”
rack, you can disregard this procedure. However, you
may then wish to remove the bottom plate and shock
absorbers as described in this procedure, as these will
not be required.
Procedure
1 Prepare the location and the necessary tools.
2 Observe the installation requirements.
a Depending on its physical properties, the Processor Unit can be installed inside
a console, in a cabinet or 19” rack, or on a desk.
b The position must be chosen to fit the available cable lengths between the
Processor Unit and the other units it connects to.
c Observe the compass safe distance.
d Make sure that enough space is made available for maintenance purposes.
Simrad SN90