110-0007509/A
17
Topside cable plan
The topside/bridge cables include those used to connect the Processor Unit and the
display to each other, as well as cables for AC mains power and external devices. One
high capacity Ethernet cable connects the Processor Unit to the Wide Band Transceiver
(WBT).
A
Display (You can use more than one display on your Processor Unit depending on
personal and/or operational preferences.)
B
Processor Unit
C
Power Supply Unit (Optional)
D
A computer keyboard and a mouse can be connected to the Processor Unit.
Cables identified with an asterisk (*) are system or commercial cables. These cables are
provided in the delivery or with the relevant item.
• If you want to use the computer on AC power you need a power supply.
• It is very important that high-quality Ethernet cables are used. You must use
Cat 5e STP (Shielded Twisted Pair) quality or better. Using cables with lower
bandwidth capacity will reduce performance.Do not make the connection using the
existing local area network (LAN).
• More than one serial line cable may be required to connect the Processor Unit to
external devices. To identify these cables, use postfix letters. (C10A, C10B, C10C...).
Tip
We strongly recommend that you install minimum two Ethernet cables between the sonar
room and the bridge. One cable is for operational use, while the other is spare.
Summary of Contents for Simrad NISE 3900E
Page 49: ......
Page 50: ... 2022 Kongsberg Maritime ...
