Kongsberg Simrad NISE 3900E, Installation Manual, Page: 5 / 50

110-0007509/A
5
About this manual
The purpose of this publication is to provide the descriptions and procedures required to
install the NISE 3900E Processor Unit.
Target audience
The publication is intended for technical personnel such as skilled shipyard workers,
electricians, qualified engineers and naval architects. It is assumed that you understand
the general principles of maritime electronic equipment. You must also be familiar with
the installation of electronic and mechanical products. You are expected to have basic
mechanical skills and familiarity with handling of sensitive electronic equipment.
Installation instructions/Installation drawings
The information in this document must be regarded as guidelines and recommendations.
Note
The installation shipyard must provide all necessary design and installation drawings, as
well as the relevant work standards and mounting procedures.
If required, all documents provided by the shipyard for the physical installation of
the echo sounder system must be approved by the vessel’s national registry and
corresponding maritime authority and/or classification society. Such approval must
be obtained before the installation can begin. The shipowner and shipyard doing the
installation are responsible for obtaining and paying for such approval.
Kongsberg Maritime AS will accept no responsibility for any damage or injury to the
product, vessel or personnel caused by equipment that has been incorrectly installed or
maintained, or by drawings, instructions or procedures that have not been prepared by
us. The outline dimensions of the echo sounder receiver found in the relevant chapter
in this manual.
End user manuals and source drawings (normally in AutoCad format) can be downloaded
from our website.
• www.kongsberg.com/fisherysounder
Registered trademarks
Observe the registered trademarks that apply.
About this manual