Kongsberg Simrad MF90, Installation Manual

Page: 345 / 426

476671/B
343
13 Remove the USB flash drive.
14 If necessary: Close the Acronis True Image program.
15 If necessary: Restart the computer.
Creating a bootable USB flash drive
A bootable USB flash drive is required if you want to use the boot application for backup
and restore purposes. The software used is
Acronis True Image . The software is installed
on the Processor Unit. It is also copied onto the USB flash drive that is provided with
the MF90 system.
Prerequisites
The following items are required:
• USB flash drive
• Computer mouse
• Computer keyboard
To create a bootable USB flash drive you will need the actual device. We strongly
recommend that you use a high capacity and high speed USB flash drive. Avoid typical
"give-away" USB flash drives and commercial low budget types.
Note
A complete backup requires a large data storage device. A standard USB flash drive may
not have the required storage capacity.
Independent of the chosen storage device, you will need the bootable USB flash drive.
Context
The software used is Acronis True Image . This procedure refers to the following software
version:: 20.0.
Procedure
1 Close the MF90 program.
a Select
Power off
to turn off the system.
b In the
Power Off
dialog box, select
Exit to Operating System
to close
the MF90 program.
c Connect the keyboard and the mouse to USB sockets on the Processor
Unit.
Setting to work