Kongsberg Simrad MF90, Installation Manual

Page: 342 / 426

340
476671/B
b Under
Backup
, select where to fetch the backup files.
Do not be confused by the "Windows (C:)" label. It signifies that the backup
contains a copy of the C-disk.
c Under
Recover to
, select where to place the recovery files.
d Select
Recover now
.
e When prompted, select
Yes
.
f When prompted, select
Restart
.
7 Wait for the recovery process to finish.
a Observe that the computer boots from the backup application.
The backup application opens automatically to do the disk and file operations
necessary for the restore.
b Observe the progress.
c Select
Shut down the computer when the operation is completed
if you want this to
happen.
d Observe that the computer boots and starts the operating system.
8 On the Processor Unit desktop, double-click the MF90 icon to start the program.
Restoring from a backup image using the boot application
Once a backup image exist, you can use it to restore the entire content of the hard disk in
the event of a failure. The software used is
Acronis True Image . You must use this restore
functionality if you are unable to start the Processor Unit from the C-disk.
Prerequisites
The following items are required:
Simrad MF90 Installation Manual