Kongsberg Simrad MF90, Installation Manual

Page: 150 / 426

148
476671/B
List of topside cables
Each topside cable used by the MF90 system is listed.
Cable
Type From To
Minimum requirements /
Comments
C1 AC Power cable Uninterruptible
power supply
(UPS) Vessel AC power 2 x 1.5 mm 2 + 1.5 mm 2 Ground
C2 AC Power cable Display Uninterruptible
power supply
(UPS) 2 x 1.5 mm 2 + 1.5 mm 2 Ground
C3 AC Power cable Processor Unit Uninterruptible
power supply
(UPS) 2 x 1.5 mm 2 + 1.5 mm 2 Ground
AC Power cable Power Supply Unit Uninterruptible
power supply
(UPS) 2 x 1.5 mm
2
+ 1.5 mm
2
Ground
C4
This cable is only required if the DC version of the Processor Unit needs to operate from AC
power.
AC Power cable Operating Panel Uninterruptible
power supply
(UPS) 2 x 1.5 mm 2 + 1.5 mm 2 Ground C5
This cable is only used with Operating Panel Mk2.
C6 DC Power cable Processor Unit Vessel DC power 2 x 6 mm
2
C7 DC Power cable Processor Unit Power Supply Unit 2 x 6 mm 2
C8 Ethernet cable Processor Unit Sonar room Cat 5e STP (Shielded Twis-
ted Pair)
C9 Video cable Processor Unit Display This is a commercial cable.
C10 Ground cable Processor Unit Vessel ground 1 x 6 mm 2
USB cable Processor Unit Operating Panel This is a commercial cable.
C11
This cable is only used with Operating Panel Mk3.
Ethernet cable Processor Unit Operating Panel This is a commercial cable. C12
This cable is only used with Operating Panel Mk2.
C13
Serial cable Processor Unit External device(s)
2 x 4 x 0.5 mm 2
C14 Ethernet cable Processor Unit Local Area
Network (LAN) This is a commercial cable.
C15
Audio cable Processor Unit Loudspeakers
2 x 0.25 mm 2
For more information about the cables, see: Comments .
Simrad MF90 Installation Manual