IS15 General Manual
58
20220760G
SDT-2 System
SIMRAD
*
IS15 Multi
SIMRAD
**
**
IS15 Multi
0.3m (1')
NMEA input
from GPS/Chart plotter
Output on NMEA
to autopilot and
Chart plotter
*
Speed/temp
transducer
Depth
transducer
Supply 10,8-15,6VDC
10 m (33')
10 m (33')
10 m (33')
IS15
Transceiver
Circuit breaker
*
**
Denotes Roblink
cable with connector
Optional extra
Figure 6-4 IS15 Multi (Tri-data) System layout
This system displays the same information as SDT-1. However,
when using two IS15 Multi heads speed and depth can be
displayed on separate instruments with large characters. With
two instruments you can also transmit speed, depth and
temperature information on NMEA to the autopilot and/or the
chart plotter if installed.
6.4
IS15 Transceiver Mounting
The IS15 Transceiver is not weather proof and should be
mounted vertically in a dry place with the cable outlets pointing
downwards.
The unit is mounted to bulkhead or panel by four screws through
the mounting lugs.
6.5
Transducers
Follow carefully the instructions that come with the speed/temp.
and depth transducers.
