Kongsberg Simrad FS70, Instruction Manual

Page: 42 / 60

40
901-80047051/2.0
Reading the Catch Sensor Pulled alarm
The Catch Sensor Pulled alarm dialog box will appear if a catch sensor is pulled.
Context
The Catch Sensor Pulled alarm dialog box will appear if a catch sensor is pulled. This
dialog box will always appear, regardless of which page you are currently on.
Procedure
1 When the Catch Sensor alarm appears, observe which catch sensor was pulled and
how many minutes have elapsed since pulled.
Note
While this dialog box is open, the minutes since pulled will continuously update. If
a new catch sensor is pulled, it will also appear in the dialog box.
2 Tap the
OK
button to dismiss the dialog box.
You will be redirected to the
Alarms/Indicators
page.
Note
If a previously-pulled catch sensor is pulled again, the Catch Sensor Pulled alarm
dialog box will not appear.
Simrad DATSS Operator Panel Instruction Manual