Kongsberg Simrad EK80, Installation Manual

Page: 74 / 354

72
394149/D
Related topics
Installing the EK80 hardware units, page 64
Equipment handling, page 320
Compass safe distance, page 301
Installing a commercial computer
The Processor Unit can be installed inside a console, inside a suitable cabinet, in a 19"
rack or on a desk. Make sure that adequate ventilation is available to avoid overheating.
Prerequisites
You must be equipped with a standard set of tools. This tool set must comprise the
normal tools for electronic and electromechanical tasks. This includes different
screwdriver types, pliers, spanners, a cable stripper, a soldering iron, etc. Each tool
must be provided in various sizes. We recommend that all tools are demagnetized to
protect your equipment.
A suitable location for the computer must be defined prior to installation. Observe the
compass safe distance.
Context
For installation of a commercial computer, refer to the manual supplied by the
manufacturer.
Note
Make sure that the chosen computer meets the EK80 requirements. The design and
construction must allow for marine use, and the computer must be able to withstand
the movements and vibrations normally experienced on a vessel. Verify that you have
easy access to cables and connectors, and that the computer can be installed in a safe
and secure way.
Standard office computers may not be well fitted for maritime use. The motions and
vibrations experienced on a vessel may reduce the computer lifetime considerably. While
installing a commercial computer, use your common sense to improve the installation
method suggested by the manufacturer.
Procedure
1 Prepare the location and the necessary tools.
2 Observe the installation requirements.
a Depending on its physical properties, install the computer inside a console, in
a cabinet or 19” rack, or on a desk.
b Choose a position to fit the available cable lengths between the computer and
the other units it connects to.
Simrad EK80 Installation Manual