Kongsberg Simrad EK80, Installation Manual

Page: 278 / 354

276
394149/D
Speed/Flow noise
Speed M1
8
6
4
2
0
Channel:
Sea state:
Use this table to record the values. Alternatively, you can type the values straight into a spreadsheet.
Make the necessary copies so that you have one table for each channel.
Test requirements
Results
A noise/speed curve is created.
Date and signature:
Related topics
Test procedures, page 256
Turning off the EK80
You must never turn off the EK80 by means of the on/off switch on the Processor Unit.
You must always close the EK80 program by selecting
Exit
on the top bar.
Context
When you do not use the EK80, turn off the display and the Processor Unit. If you are
not using the EK80 for a long period of time, we recommend that you turn off the Wide
Band Transceiver (WBT). Use the on/off switch on the power supply, or disengage
the circuit breakers.
Procedure
1 Select
Exit
on the top bar.
Observe that the EK80 program closes down.
Tip
If the EK80 Processor Unit is used as a server with one or more clients connected, a
relevant message will appear. We recommend that you turn these clients off first.
Closing down the EK80 program with clients connected will take longer time.
Simrad EK80 Installation Manual