Kongsberg Simrad CS90, Reference Manual

Page: 562 / 686

560
442700/A
User Settings Setup page , page 600
Software License page, page 601
Transceiver Upgrade page, page 603
Simrad Connect page , page 603
Sensor Installation page
For the CS90 system to use and offer correct navigational information, one or more external
sensors must be connected. Typical sensors are those providing navigational information
(heading, speed or geographical position). Use the
Sensor Installation
page to define which
external sensors your CS90 system will import information from. You must also specify
which datagram formats to use. For each relevant sensor you must insert the offset values
that define the its physical location relative to the vessel’s coordinate system.
Prerequisites
The
Installation
dialog box is not available when your CS90 system is set to Replay mode.
How to open
This page is located in the
Installation
dialog box. To open the page, select
Installation
on the
Setup
menu.
Description
The
Sensor Installation
page allows your CS90 system to communicate with external sensors
and systems. The parameters are organized in groups.
Installed Sensors
The
Installed Sensors
list contains all the sensors that are currently installed on the
CS90 system. Select a sensor in the list to edit its interface properties, or to remove it.
Select
New
in the list to add a new sensor interface to the CS90 system.
Sensor
In the
Sensor
group you select which type of sensor you want to receive information
from. You must specify which communication port to use (LAN (Local Area
Network) or serial port). You can type a custom name to identify the sensor import.
Select
Inspect Port
to verify that the communication parameters of the chosen port
have been set up correctly.
Simrad CS90 Reference Manual