Kongsberg Simrad CS90, Reference Manual

Page: 279 / 686

442700/A
277
Approved anti-fouling paints
This is our list of approved antifouling paints for all transducer types. Always refer to the
manufacturer's documentation and data sheets for a complete procedure and for relevant
safety information.
Important
Do not paint the transducer with traditional hull plating paint. Use only the correct type of
approved paint specified.
Do not use high-pressure water, sandblasting, metal tools or strong solvents to clean the
transducer face.
Jotun
•
Manufacturer
: Jotun
•
Address:
P.O.Box 2021, N-3248 Sandefjord, Norway
•
Manufacturer’s website
: http://www.jotun.com
Products:
• SeaMate M
–
Primer
: Safeguard Universal ES
Apply 80 µm wet film thickness (50 µm dry film thickness).
–
Paint
: SeaMate M
Apply 250 µm wet film thickness (125 µm dry film thickness).
• SeaQuantum Ultra S
–
Primer
: Safeguard Universal ES
Apply 80 µm wet film thickness (50 µm dry film thickness).
–
Paint
: SeaQuantum Ultra S
Apply 250 µm wet film thickness (125 µm dry film thickness).
• Seaforce 200 AV
–
Primer
: Safeguard Universal ES AV
Apply 70 µm wet film thickness (50 µm dry film thickness).
–
Paint
: Seaforce 200 AV
Apply 140 µm wet film thickness (90 µm dry film thickness).
Data sheets and application guides can be downloaded from:
http://www.jotun.com/ww/en/b2b/technical-info/tds/index.aspx
Maintenance procedures