Kongsberg Simrad CS90, Reference Manual

Page: 175 / 686

442700/A
173
Related topics
Saving, retrieving and handling user settings, page 169
Choosing factory default settings
Sometimes it may be useful to reset the CS90 system to work with a set of known user
settings. A set of "factory settings" is provided for this purpose. The factory settings may
be put to use if you are uncertain of which values to use. They offer the "best practice"
settings for typical use.
Context
The
User Settings
dialog box is used to store your favourite settings. These settings can be
related to different operations, environmental conditions or basic personal preferences. You
can use different settings to create as many user profiles as you like, and give them any
name. All the settings you have chosen using functions and dialog boxes in the user interface
are saved. To activate either a factory setting or a saved setting, select the relevant name in
one of the lists, then select
Activate Selected Setting
. The factory settings cannot be changed.
When you want to apply the factory settings a small dialog box opens to request your
confirmation.
Note
Unless they are saved, all your current settings are lost when the factory settings are
applied. There is no "undo".
Procedure
1 Observe the
Main
menu.
Its default location is on the right side of the display presentation.
2 Select
User Settings
.
Observe that the
User Settings
dialog box opens.
3 Observe the
Factory Settings
list.
4 Select the setting you want to use.
5 Select
Activate Selected Setting
.
6 Select
OK
to apply your changes and close the
User Settings
dialog box.
Related topics
Saving, retrieving and handling user settings, page 169
Operating procedures