Kongsberg Simrad CS90, Reference Manual

Page: 133 / 686

442700/A
131
Choosing which echo data file(s) to replay
When you record echo data the information is stored on the Processor Unit hard disk.
Depending on your initial settings, the files can also be stored on an external storage device.
The echo data files can be retrieved and played back on the CS90 system.
Context
All playback is controlled by the replay bar.
A
Stop
: Select this button to stop the playback.
B
Play/Pause
: Select this button to start the playback, or to pause it.
C
Replay Speed
: Select this slider and move it sideways to adjust the replay speed.
D
Replay File
: The button shows you which file you are replaying. Select the button to
open the
Replay File
dialog box.
E
Playback Progress
: This bar shows you the progress of the replay sequence. If you
have chosen to restart the replay file(s) automatically (in a loop), the green indicator
starts from left every time the file restarts.
Procedure
1 Open the
Operation
menu.
2 Select
Operation
to see the available choices.
3 Select
Replay File
to open the dialog box.
The
Replay File
dialog box allows you to choose which file(s) to be used for playback.
The files listed were generated automatically during recording. Each file is identified
with the time and date it was made.
4 Select
Add
to choose a replay file.
A standard operating system dialog box is used to locate and select the files you wish
to use.
5 If you wish to replay the selected files in an "endless" loop, select
Loop
.
6 Select
OK
to save the selected settings and close the dialog box.
Operating procedures