Kongsberg Simrad CS90 Reference Manual Download

Page: 125 / 686

442700/A

123

The choice you make is by default only applied to the currently selected (active) view.

Reducing noise and false echoes with the Ping-Ping Filter

The

Ping-Ping Filter

analyses the historical information from previous consecutive pings in

order to remove unwanted noise and interference from the echo presentation.

Context

The following filter options are provided:

•

Off

: Select

Off

to disable the filter. The historical information from previous

transmissions ("pings") are not used to remove noise and unwanted echoes.

•

Weak

: Select

Weak

to allow the filter to compare the echoes from the latest two pings.

For the current echo to be shown, it must be present in both of these pings.

•

Medium

: Choose

Medium

to compare the echoes from the latest four pings. For the

current echo to be shown, it must be present in

all

of these pings.

•

Strong

: Select

Strong

to allow the filter to compare the echoes from the latest eight pings.

For the current echo to be shown, it must be present in

all

of these eight pings.

The filters in the CS90 system are implemented in “series”. The

Ping-Ping Filter

is the last

filter in the sequence, so any changes to the other filters may have an effect on how it works.

Procedure

Click in any view to make it active.

The active view is identified with a thicker border.

Open the

Active

menu.

Select

Ping-Ping Filter

Choose the required setting.

The choice you make is by default only applied to the currently selected (active) view.

Operating procedures

Summary of Contents for Simrad CS90















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Simrad CS90

Reviews:

Related manuals for Simrad CS90

Brands by name

Popular brands

Kongsberg Simrad CS90, Reference Manual

Search results

Summary of Contents for Simrad CS90

Reviews:

Related manuals for Simrad CS90

Brands by name

Popular brands