Simrad AP20 Autopilot
84
20220505H
There are several actions that you can do once you have accessed
the IM:
•
Answer YES to the question by rotating the course knob
clockwise.
•
Change the selected item shown by rotating the course knob.
•
Proceed to the next item in the menu by pressing the STBD
push-button. (Proceeding to the next item when presented
with a question is the same as answering NO to the question.)
•
Proceed back to the previous item in the menu by pressing the
PORT button.
•
Leave the IM by selecting STBY, AUTO, or NAV.
On new installations, and whenever a control unit, junction unit,
or software is replaced in an AP20 system, it is recommended
that a MASTER RESET be performed as described in the IM
prior to proceeding with the setup procedure.
When using the ISM refer to diagram "Installation settings Menu
Flow Chart" on previous page.
Language selection
The AP20 can present the display in eight different languages:
•
English, Deutsch, Francais, Espanol, Italiano, Nederlands,
Svenska and Norsk.
To access the language selection in the IM:
1.
Select Language by using the STBD / PORT buttons
2.
Answer yes by turning the course knob.
3.
Turn the course knob to
select the language you
wish to use.
4.
Leave the IM by a press
on the STBY button, or
continue to next item in
the IM by pressing
STBD button.
Language
English
Deutsch
Francais
Espanol
Italiano
Nederlands
Svenska
Norsk