Kongsberg M3 Sonar Reference Manual Download

Page: 57 / 182

922-20297001/1.2

Measuring distances

You can use the tape measure tool to draw a line in the sonar view and measure the distance
between two points.

Context

Measures distances on the sonar view. Also allows you to place a measurement overlay
on the sonar view.

Procedure

Click the

Tape Measure

button.

This button is located on the tool bar.

Click and hold the left mouse button on your first target, then drag the mouse
to your second target.

The length and bearing between the targets is displayed dynamically.

Note

The measurement line will not remain on the display when you release the mouse button.

To keep the measurement line on the display, place a measurement overlay.

Click and hold the right mouse button on your first target.

Drag the mouse to your second target and release the mouse button.

Move the mouse to a place on the screen where you would like to place the
overlay length and bearing label.

Note

Once the measurement overlay is placed, you can use the default arrow cursor
to drag the length and bearing label to a position on the screen where it is more
legible.

Click the left mouse button to place the overlay.

Tip

To remove this overlay, click the

Wiper

button, then click the overlay.

Related topics

Tape Measure, page 153

Operating procedures

Summary of Contents for M3 Sonar























































































































































































Search results

Summary of Contents for M3 Sonar

Reviews:

Related manuals for M3 Sonar

Brands by name

Popular brands

Kongsberg M3 Sonar, Reference Manual

Search results

Summary of Contents for M3 Sonar

Reviews:

Related manuals for M3 Sonar

Brands by name

Popular brands