Kongsberg M3 Sonar, Reference Manual

Page: 156 / 182

154
922-20297001/1.2
automatically be closed, and a rectangular label will appear providing information about
the area and perimeter. Move the label to a position on the screen where it is most legible,
then click the left mouse button to place it.
Tip
You can place multiple areas on the display. The areas will remain on the display until you
delete them individually with the
Wiper
function.
Related topics
Defining an area, page 57
Text Label
The text label tool allows you to place comments on the screen.
Click the
Text Label
button. In the sonar view, click the area of interest that you
want to label. Click and hold the left mouse button on the label overlay and drag it
to a place on the screen where the text is legible. Double-click on the label overlay to
open an
Edit Text Box
dialog box.
Tip
If the text you entered does not fit within the text label overlay, you can resize the label by
clicking on the label border, then dragging it to create a larger label.
Related topics
Placing text labels, page 57
Reference cursors
You can place one or two reference cursors as overlays on the sonar view. When you place
two cursors, an additional overlay will appear with information about the cursors.
To mark a point of interest, you can place a cross-hair type marker on the sonar
view. Click one of the
Reference Cursor
buttons. Choose where you want to
place the cursor, then click the left mouse button to place it. The range and bearing of the
cursor’s position — relative to the Sonar Head — is shown in the bottom-left corner of
the view.
When you place both cursor 1 and cursor 2 on the sonar display, the cursor range and
bearing — relative to the Sonar Head— will be displayed. “Delta” shows the range and
bearing from cursor 1 to cursor 2.
M3 Sonar FLS Reference Manual